5/16ths tinned lugs are standard. 3/8ths available for HD solenoid cables. Bare copper lugs also available.
All our cables are soldered with silver bearing solder for maximum performance that is superior to crimped connections. NASA solder's their connections, so should you.
624 strands of 30awg wire. RoHS Compliant (Resistance to Oils, greases, fire).
Meets or Exceeds SAE J1127 Standards. 50C to +105C rated (-58F to +221F). Flexible enough to route around your batteries and frame. High Quality 3:1 heat shrink on connections. Many sellers use cables that are to long. We guarantee fitment as listed. We offer cables in Black, Blue, Green, Red and Yellow colors. Standard color is black unless otherwise requested.We also do custom orders for those who move components around. Feel free to ask us any questions you may have! Club Car used an OBC until 2014. All carts that utilize the 4 x 12V configuration that still use the factory charger must select a method of install for the cable kit.
1 we can leave the lug off one side of the main negative cable for you to slide it through the OBC hole and then you solder the last lug on. We provide the solder and heat shrink in the package. The cable will likely need to be lubricated with an oil to slide it through the OBC. 2 we can cut the main negative into two separate cables. We provide instructions on how to assemble this passthrough. You will need a small piece of threaded rod, two plastic washers, 4 nuts, 2 metal washers and two locking washers. Leave the message telling us which method you wish to choose. If there is no note attached, the kit will come fully assembled assuming no OBC remains.